Why Buy New, When You Can Buy Better Than New.....
UsedCMM - Frequently Asked Questions
  1. Why should I buy a Used CMM vs. New CMM?
    • As mention on the "Why Buy Used" section and confirmed by our own expertise, CMMs manufactured in the 1980's & 1990's are mechanically superior to those CMMs built today.
  2. Can I see the CMM measure my part?
    • All of our Used CMMs are ready for customer demonstrations using their own supplied parts. We ask that all part(s) and print(s) be sent to us no less than one week prior to the demonstration date for programming. We'll gladly provide a complimentary inspection report of your part(s) at the end of our demo. Our demonstration process is limited and shall not exceed inspection of more than (2) customer supplied parts.
  3. Does the Used CMM come with a warranty?
    • Yes, all of our Used CMMs come with a minimum 12-Month warranty unless otherwise specified. All warranty claims (excluding Renishaw Components) are subject to evaluation by our CMM Technicians. All Renishaw component warranty claims are subject to inspection by Renishaw. All Renishaw components suspect of warranty claims will be sent back to Renishaw for evaluation.
  4. How do I know what CMM software to buy?
    • We offer several different software packages and use of the Renishaw UCC controller, an open controller compatible with any I++ DME software package. We'll be happy to discuss your software requirements and recommend the most efficient measurement program suited to your needs.
  5. Should I be concerned with the OEM date of manufacture of the CMM?
    • Unlike most other used CMM dealers, we completely replace all the OEM wiring and linear scales with NEW Renishaw CMM grade equipment. The motors and gear boxes are tested and rebuilt. Same for the air bearings. We only recycle the CMM frame and granite.
  6. Is a rebuilt "Green" CMM worth the same as a new CMM?
    • Again, as previously mentioned in the 'Why Buy Used" section, older CMMs are mechanically superior to those built today. Why buy a New, less mechanically accurate CMM instead of recycling an existing CMM frame/stage.
  7. What if the CMM is obsoleted by the OEM?
    • All of our CMMs have been remanufactured using OEM Renishaw CMM parts. Renishaw is a prominent name in the CMM industry, guaranteeing all CMM parts are supported or upgradeable to current technology.
  8. Is a Used CMM as fast as a new CMM?
    • With the new Renishaw electronics and use of the latest Renishaw XL Laser system equipped with CMM dynamic software, we set the speed to match the rigidity of the CMM. The slow speed root cause was due to slow OEM electronics and NOT the superior frame/stage. Yes, there are some slow, poorly built CMMs out there, however we know them and choose not to rebuild those brands. Used CMM has been repairing and calibrating CMMs for over 30 years, our experience has led us to selecting only those superior CMMs for remanufacture.
  9. I need a specific CMM not listed on your website
    • If we do not have the exact CMM in stock you need, we'll find that exact CMM you are looking for and rebuild it custom to your specification.
  10. What are the payment terms?
    • All used CMM purchases require a 50% down payment to secure the CMM. In some cases 100% payment prior to delivery may become necessary based upon the customer's D&B credit report.
  11. What forms of payment do we accept?
    • Cash
    • Company Check
    • Cashier Check or Money Orders
    • Credit Cards: MasterCard, Visa, American Express
    • PayPal
  12. Will I still have to have the OEM service my CMM purchased from Used CMM?
    • No, unlike most OEM systems, any Renishaw approved retrofitter can service your CMM purchased from Used CMM.
  13. What is ISO/IEC 17025?
    • ISO/IEC 17025 is the main standard used by testing and calibration laboratories. Unlike ISO 9000, ISO/IEC 17025 adds a concept of competence to the equation, and applies directly to any organization that produces testing and/or calibration results.
  14. Why do I care if I have an ISO/IEC 17025 accredited CMM Calibration Certification?
    • Laboratories use ISO/IEC 17025 to implement a quality system aimed at improving their ability to consistently produce valid calibration results. It is also on this basis that a formal recognition of a demonstration of that competence.
  15. Do I have to have Used CMM service/certify my CMM annually?
    • As much as we would greatly appreciate your return business and loyalty, our customers have the option of choosing any CMM service provider for repairs and calibration certification services. We strongly recommend that our customers chose an ISO/IEC 17025 (A2LA) accredited source and a Renishaw approved retrofitter to service our remanufactured CMMS. However, at the end of the day it's the customer's choice. In parting, please remember that Used CMM  is ISO/IEC 17025 (A2LA)  accredited and a Renishaw approved retrofitter.